Meny
SENSOR:
Range: 12” to 98.4’ (30cm to 30m)
Frequency: 26 GHz.
Accuracy: ± 3mm
Dead band: 12” (30cm)
Beam angle: 12º
Supply voltage: 16-26 VDC
Signal output: 4-20 mA, two-wire
Process temp.: F: -40º to 212º, C: -40º to 100º
Pressure: Atmospheric
Enclosure rating: IP68
Process mount: 304 bracket or 1” NPT
DISPLAY:
Display type: LCD, dot matrix
Display units: Feet and meters
Display bar: Percent of span
Display graph: Echo signal curve
Configuration: Push button
Enclosure type: Wall mount
Enclosure rating: IP67
COMMON:
Certification: cTUVus, FCC
Compliance: CE, RoHS
The general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA signal output, and is configured via its remote push button display module. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications located below or above grade. Select this sensor for challenging process conditions that may include light surface foam or agitation, small trash or plant material, wind, condensation or vapor. Each comes with a 32.8’ (10m) cable, mounting bracket and display module. The sensor is designed for bracket mount installation suspended above the liquid level.
| Flens størrelse | 4″ ANSI flens, 6″ ANSI flens |
|---|
Legg igjen enten epost eller telefon også vil vi kontakte deg så fort vi kan. Informasjonen vil kun bli benyttet til dette formålet.
Omtaler
Det er ingen omtaler ennå.